Not often does a stock offer both momentum and value. �For the former we screened for stocks with market caps of $2 billion or more that had gained at least 50% in the last year and were up at least 20% in the last month.� On the value front, we refined the screen by limiting the universe to stocks with a PE to earnings growth (PEG) ratio less than 1.0.
We came up with four names: Manitowoc Co. Inc. (MTW), Questcor Pharmaceuticals Inc. (QCOR), United Continental Holdings Inc. (UAL) and YY Inc. (YY).� Then we used some not-so-secret sauce of our own to eliminate MTW, a farm and construction machinery maker, and UAL, a major airline, because we fear softening economic indicators, among them employment growth and durable goods orders.� We also tossed YY, a Chinese internet information provider, because we freely admit our ineptitude at analyzing Chinese equities.
Top Valued Stocks For 2015: CNH Industrial NV (CNHI)
CNH Industrial NV is a Netherlands-based company primarily engaged in the manufacture of heavy machinery and vehicles equipment. It divides its activities into four main businesses. The Agricultural Equipment offers agricultural equipment under the New Holland Agriculture, Case IH brands and the Steyr brand. The Construction Equipment produces excavators, bulldozers, backhoes, compactors and other construction equipment under the New Holland Construction and Case Construction Equipment brands. The Trucks & Commercial Vehicles manufactures trucks and a commercial vehicles, including buses, coaches and special vehicles under Iveco, Iveco Bus and Heuliez Bus brands, as well as it produces quarry and mining equipment through Iveco Astra, and fire fighting vehicles through the Iveco Magirus brand. The Powertrain offers transmission systems, engines for marine application and power generation through FPT Industrial brand. Advisors' Opinion:- [By Lisa Levin]
CNH Industrial NV (NYSE: CNHI) shares tumbled 2.47% to reach a new 52-week low of $11.44. CNH Industrial reported an 11% drop in its third-quarter profit.
- [By Holly LaFon]
The largest detractor for the quarter was CNH Industrial (CNHI), a global agricultural and construction equipment manufacturer, which fell 11%.� CNH released its nine-month results, which showed revenue growth of 0.6%, but the company�� margins were adversely affected by Iveco, its trucks and commercial vehicles segment.� Iveco�� margins fell short of expectations due to tough pricing, high launch costs, negative mix and increases in bad debt provisions.� Management maintains full-year guidance of 3-4% revenue growth.� We believe improvements in the Iveco division will help CNH Industrial achieve its long-term margin targets.�
- [By GuruFocus]
According to GuruFocus list of 52-week lows, these Guru stocks have reached their 52-week lows.Deutsche Bank AG (DB) Reached the 52-Week Low of $36.04The prices of Deutsche Bank AG (DB) shares have declined to close to the 52-week low of $36.04, which is 36.1% off the 52-week high of $54.49. Deutsche Bank AG is owned by 3 Gurus we are tracking. Among them, 2 have added to their positions during the past quarter. 1 reduced their position.Deutsche Bank Aktiengesellschaft is a stock corporation organized under the laws of Germany. Deutsche Bank Ag has a market cap of $36.74 billion; its shares were traded at around $36.04 with a P/E ratio of 413.90 and P/S ratio of 0.90. The dividend yield of Deutsche Bank Ag stocks is 2.10%.David Dreman (Trades, Portfolio) owns 58,725 shares as of 03/31/2014, an increase of 404.64% from the previous quarter. This position accounts for 0.2% of the $1.29 billion portfolio of Dreman Value Management. Mario Gabelli (Trades, Portfolio) owns 6,250 shares as of 03/31/2014, which accounts for 0.0015% of the $18.53 billion portfolio of GAMCO Investors.Ross Stores Inc (ROST) Reached the 52-Week Low of $67.16The prices of Ross Stores Inc (ROST) shares have declined to close to the 52-week low of $67.16, which is 21.2% off the 52-week high of $81.99. Ross Stores Inc is owned by 14 Gurus we are tracking. Among them, 7 have added to their positions during the past quarter. 5 reduced their positions.Ross Stores, Inc., is a Delaware Corporation. It turned public with its IPO in August 1985. Ross Stores Inc has a market cap of $14.21 billion; its shares were traded at around $67.16 with a P/E ratio of 17.00 and P/S ratio of 1.39. The dividend yield of Ross Stores Inc stocks is 1.10%. Ross Stores Inc had an annual average earnings growth of 23.20% over the past 10 years. GuruFocus rated Ross Stores Inc the business predictability rank of 4.5-star.ROST recently reported earnings per share for the 13 weeks ended May 3, 2014 of $1.15, up from $1.07 fo
Top 10 Machinery Companies To Watch In Right Now: IDEX Corp (IEX)
IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.
Fluid & Metering Technologies Segment
The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.
Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.
!
CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.
Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.
Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.
The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.
Health & Science Technologies Segment
The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.
IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.
IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.
CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.
Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.
Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.
Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.
MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.
!Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.
The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.
Fire & Safety/Diversified Products Segment
The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.
Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.
Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.
Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.
Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.
The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.
Advisors' Opinion:- [By Rich Duprey]
Diversified technology machinist�IDEX (NYSE: IEX ) announced yesterday its second-quarter dividend of $0.23�per share, the same rate it paid last quarter after raising the payout 15% from $0.20 per share.
- [By Marc Bastow]
This week’s biggest increase came from applied solutions provider Idex (IEX), which �raised its quarterly dividend 22% to 23 cents per share payable April 30 to shareholders of record April 16.
IEX Dividend Yield: 1.60%
Top 10 Machinery Companies To Watch In Right Now: First Majestic Silver Corp.(AG)
First Majestic Silver Corp. engages in the production, development, exploration, and acquisition of mineral properties with a focus on silver in Mexico. The company owns interests in La Encantada Silver Mine comprising 4,076 hectares of mining rights and 1,343 hectares of surface land located in Coahuila; La Parrilla Silver Mine consisting of mining concessions covering an area of 69,867 hectares; and San Martin Silver Mine comprising approximately 7,841 hectares of mineral rights and approximately 1,300 hectares of surface land rights located in Jalisco. It also holds interests in Del Toro Silver Mine consisting of 393 contiguous hectares of mining claims and an additional 129 hectares of surface rights located in Zacatecas; Real de Catorce Silver Project comprising 22 mining concessions covering 6,327 hectares located in San Luis Potosi state; and Jalisco Group of Properties consisting of mining claims totalling 5,240 hectares located in Jalisco. The company was founded in 1979 and is headquartered in Vancouver, Canada.
Advisors' Opinion:- [By Doug Ehrman]
It is no secret that precious metals companies have been taking a pounding for some time now. The SPDR Gold Trust (NYSEMKT: GLD ) and iShares Silver Trust (NYSEMKT: SLV ) , the gold and silver ETFs, have been hard hit and operating companies like First Majestic (NYSE: AG ) and Barrick Gold (NYSE: ABX ) have been hit even harder. Through all of these struggles, and in some cases because of them, one precious metals company continues to look attractive for the long term: Silver Wheaton (NYSE: SLW ) .
- [By Doug Ehrman]
While many precious-metals companies have been in a slump of late, there is one that belongs perpetually in your portfolio: Silver Wheaton (NYSE: SLW ) . The company is not like other miners -- including Pan American Silver (NASDAQ: PAAS ) and First Majestic (NYSE: AG ) -- in that it has a unique business plan that insulates it against many of the vagaries of the mining business. Moreover, because silver will always have a significant industrial demand component, even with the heightened volatility you see in the silver market, maintaining exposure to silver is appropriate.
- [By Laura Brodbeck]
Tuesday
Earnings Expected: Fossil Group (NASDAQ: FOSL), CST Brands (NYSE: CST), First Majestic Silver (NYSE: AG) Economic Releases Expected: US retail sales, US redbook, German ZEW economic sentiment, Chinese retail sales, Chinese industrial productionWednesday
- [By Zacks]
Originally posted here...
Most Popular Earnings Expectations For The Week Of July 14: Big Banks, Tech Giants And More GT Advanced Technologies Down Sharply On iPhone Production Concerns UPDATE: Barclays Upgrades Apple, Has High Expectations For Near Term Perrigo Rumored To Be On Block; 'Market Source' Sees 25% Premium 9 IPOs To Watch For This Week
Top 10 Machinery Companies To Watch In Right Now: Deutz AG (DEZ)
DEUTZ AG is a Germany-based manufacturer of diesel engines. The Company produces engines with outputs of between 19 kilowatts (kW) and 520 kW for on-road as well as non-road applications. Its activities cover development, design, production, sales and services for diesel engines that are cooled by water, oil or air. DEUTZ AG divides its activities into two segments: DEUTZ Compact Engines and DEUTZ Customized Solutions. DEUTZ Customized Solutions segment focuses on air-cooled engines and large liquid-cooled engines with capacities of more than eight liters. The segment DEUTZ Compact Engines comprises liquid-cooled engines with capacities of less than four liters as well as engines with capacities of four to eight liters. The Company is the executive and operating company within the DEUTZ Group. It has a global reach with its production sites, ten distribution companies, nine sales offices, as well as over 800 distribution and service partners in more than 130 countries worldwide. Advisors' Opinion:- [By Jonathan Morgan]
RWE AG (RWE) jumped 6.4 percent, leading a gauge of utilities higher. Deutz AG (DEZ) plunged the most in more than two years after an investor sold a 8.4 percent stake in the manufacturer of diesel engines. ProSiebenSat.1 Media AG (PSM) dropped 1.1 percent after Telegraaf Media Groep NV sold its stake in the company.
Top 10 Machinery Companies To Watch In Right Now: MSC Industrial Direct Co Inc (MSM)
MSC Industrial Direct Co., Inc. (MSC), incorporated on October 25, 1995, is direct marketers and distributors of a range of metalworking and maintenance, repair and operations (MRO) products to customers throughout the United States. The Company operates primarily in the United States, with customers in all 50 states, through a network of five customer fulfillment centers (four customer fulfillment centers are located within the United States and one is located in the United Kingdom and 106 branch offices (104 branches are located within the United States, one is located in the United Kingdom and the other is located in Mexico). The Company offers approximately 600,000 stock-keeping units (SKUs) through its master catalogs, weekly, monthly and quarterly specialty and promotional catalogs, brochures and the Internet, including its Websites, mscdirect.com, mscmetalworking.com and use-enco.com (MSC Websites). In April 2013, the Company announced that it has completed the acquisition of the North American distribution business (BDNA or the Business) of Barnes Group Inc.
The Company's customers include a range of purchasers of industrial supply products, from individual machine shops to Fortune 1000 companies, to government agencies, such as the General Services Administration (GSA) and the Department of Defense. The Company uses its database of companies and contacts, and the Company also purchases information on prospective customers in the form of databases, mailing lists, and email lists to target the distribution of these various publications and other marketing vehicles to specific individuals within an organization whose purchasing history or other criteria suggest receptiveness to specific publication titles and promotions. The Company also provides electronic ordering capabilities (EDI and XML) to support its customers' purchase order processing.
The Company's products represent a range of MRO products that include cutting tools; measuring instruments; tooling component! s; metalworking products; fasteners; flat stock; raw materials; abrasives; machinery hand and power tools; safety and janitorial supplies; plumbing supplies; materials handling products; power transmission components; and electrical supplies. The Company provides product information and ordering capabilities on the Internet. The Company also maintains a hardware and software platform in support of its VMI program, which allows customers to integrate scanner-accumulated orders directly into its Sales Order Entry system.
Advisors' Opinion:- [By Anna Prior]
MSC Industrial Direct Co.(MSM) said its fiscal third-quarter earnings edged higher will revenue increased following higher demand. Still, shares dropped 5.8% to $87.89.
- [By Ben Levisohn]
Barclays’ Scott Davis and team believe it might be, and for evidence they look at�3M (MMM), Emerson Electric (EMR), Rockwell Automation (ROK), and MSC Industrial Direct (MSM). They write:
Top 10 Machinery Companies To Watch In Right Now: GT Advanced Technologies Inc (GTAT)
GT Advanced Technologies Inc., incorporated on September 27, 2006, is diversified technology company with crystal growth equipment and solutions for the global solar, light emitting diode (LED) and electronics industries. The Company operates in three segments: its polysilicon business, its photovoltaic (PV), business and its sapphire business. The Company's principal products are Silicon Deposition Reactors (SDR) and related equipment used to produce polysilicon, the key raw material used in silicon-based solar wafers and cells; Advanced sapphire crystallization furnaces (ASF) which are used to crystallize sapphire boules, and Directional solidification (DSS) furnaces and related equipment used to cast multicrystalline and MonoCast crystalline silicon ingots. On January 7, 2013, the Company announced the idling of its HiCz pilot manufacturing facility in Hazelwood, Missouri. On November 8, 2012, the Company acquired certain assets of Twin Creeks Technologies, Inc. (Twin Creeks). In May 2013, the Company acquired the business of Thermal Technology LLC.
PV Business
The focus of the Company's PV business is the development, manufacture and sales of crystallization growth furnaces to produce silicon ingots used in the production of solar wafers. The Company's principal product line has been the DSS family of casting furnaces that are used to produce multicrystalline ingots and MonoCast ingots. As of December 31, 2012, the Company shipped approximately 3,300 DSS crystallization furnaces. The ingots are used to make photovoltaic (PV) solar wafers and cells. HiCz, or continuous Czochralski (Cz) growth process, produces monocrystalline ingots that are designed to produce more efficient wafers. The Company�� DSS furnace is a specialized furnace used to melt polysilicon and cast multicrystalline ingots. Multicrystalline ingots are used to produce solar wafers, which ultimately become solar cells. The Company markets its DSS crystallization furnaces under the names DSS450HP and DSS6! 50. The Company's largest capacity DSS furnace, the DSS650, is capable of producing ingots that weigh up to 650 kilograms using standard silicon feedstock. In January 2012, the Company introduced its MonoCast silicon casting technology that uses the DSS furnace architecture to produce ingots comprised of a high percentage of monocrystalline material. The Company is markets MonoCast technology under the name DSS450 MonoCast.
The Company�� ancillary equipment provides operators with material handling assistance during the preparation of the crucible before it is loaded with silicon and during the loading and unloading of the crucible into the DSS furnace chamber at the start of the growth process and out of the DSS furnace chamber at the conclusion of the ingot growth process. The Company's ancillary equipment includes crucible coating stations, crucible manipulators, loaders/unloaders, extraction tools and other material handling systems required to safely transport material during the ingot growth process. The Company sells replacement parts and consumables used in its DSS furnaces and other PV equipment.
Polysilicon Business
The Company's polysilicon business offers Silicon Deposition Reactors, which utilize the chemical vapor deposition process, and related trichlorosilane (TCS) technology and equipment along with engineering services to existing polysilicon producers and new market entrants. The Company's polysilicon business focuses on product design, quality control, engineering services, project management and process development related to the production of polysilicon. It markets its SDR reactors under the names SDR300, SDR400, SDR 500 and SDR 600. The Company provides equipment, technology and engineering services for the production and purification of TCSand silane. This hydrochlorination technology eliminates the need for silicon tetrachloride converters which are required when using certain other polysilicon production technology. The Company also pr! ovides an! cillary equipment and technologies for producing seed rods used in its SDR reactors and for handling and processing the polysilicon rods into a finished product.
Sapphire Business
The Company's sapphire business markets and sells of the Company's ASF systems to customers to enable them to produce sapphire material. The Company also produces sapphire material, on a limited basis, for the LED and other specialty markets at its sapphire pilot production facility in Massachusetts. Its ASF systems produce monocrystalline sapphire material, referred to as sapphire boules. The sapphire boules are used to make sapphire wafers, a substrate for manufacturing LEDs, as well as sapphire blanks and windows for such applications as medical devices and watch crystals. The Company's ASF technology is based on the heat exchanger method (HEM), which is a directional solidification technique, which crystallizes the sapphire meltstock material during the growth process. The Company also uses the facility as a research and development (R&D) center to test new technology developments prior to commercial release. The Company markets and sells its ASF systems under the name ASF100. The Company also provides engineering and product design, quality control, process engineering, engineering services and field services related to the operation of its ASF furnaces. The Company produces sapphire material on a limited basis at its pilot production facility in Massachusetts. The Company sells this material to customers in the LED and other markets, such as the aerospace, defenses and medical device.
The Company manufactures and sells two principal types of sapphire materials: hems Sapphire Material and Titanium-doped Sapphire (Ti:Sapphire) Material. Using the material derives from the sapphire boule generated with its ASF furnaces, the Company cut the sapphire material in a number of different dimensions and crystal orientations, in form factors such as cores, rods, blanks, windows and tubes. The! Company ! generates sapphire boules that are doped with titanium. The Company provides certain finishing and polishing for its Ti:Sapphire material.
The Company competes with ALD Vacuum Technologies AG, JYT Corporation, Ferrotec Corporation, PVA TePla AG, Centrotherm Elektrische Anlagen GmbH & Co., Jing Gong Technology, Zhejiang Jingsheng Mechanical & Electrical Co., Ltd, MSA Apparatus Construction for Chemical Equipment Ltd, Centrotherm Elektrische Anlagen GmbH & Co., Morimatsu Industry Co. Ltd., Poly Plant Project, Inc., Hemlock Semiconductor Corporation, Wacker Chemie AG, MEMC Electronic Materials, Inc., Renewable Energy Corporation ASA, Thermal Technology LLC, Advanced Renewable Energy Company, LLC, Rubicon Technology, Inc., Sapphire Technology Co. Ltd. (Korea), Kyocera International Inc., Saint-Gobain, Gavish Inc., and Monocrystal.
Advisors' Opinion:- [By John Udovich]
By consumer electronics, he meant Apple (NASDAQ: AAPL)���the big gorilla in the room for display makers which announced in�November 2013 a $578 million deal with GT Advanced Technologies Inc (NASDAQ: GTAT) wherein GTAT would supply sapphire glass�to AAPL. It should be mentioned that a recent Forbes article has pointed out that Corning Incorporated���specialty materials segment posted sales of $1.17 billion in 2013 and that three customers accounted for 47% of segment sales for the year. On Thursday, Corning Incorporated rose 1.08% to $21.59 (GLW has a 52 week trading range of $12.64 to $21.76 a share) for a market cap of $30.03 billion plus the stock is up 21.4% since the start of the year, up 62% over the past year and up 35.3% over the past five years.
- [By Mani]
[Related -GT Advanced Technologies Inc (GTAT): A Gem That's About To Shine?]
Sapphire's higher scratch resistance qualities could lengthen the average lifetime of mobile devices, which could slow the replacement demand, which in turn this could slow the build out of sapphire capacity needed to meet the future demand for such devices.
- [By rusticnomad]
GT Advanced Technologies (GTAT) posted poor results last quarter. The declining revenue and a weak performance in the sapphire segment is impacting GT�� market share. The poor results failed to impress investors. However, GT is trying to get better, and with a strong earnings CAGR of 47.90%, it might prove to be a better investment for the future.
- [By John Udovich]
Solar stocks have not exactly given buy and hold investors a smooth ride, but small cap�GT Advanced Technologies Inc (NASDAQ: GTAT) could be an interesting materials play on the solar sector���meaning its worth taking a closer look at the stock along with potential peers like Ascent Solar Technologies, Inc (NASDAQ: ASTI) and STR Holdings, Inc (NYSE: STRI) plus solar ETF Guggenheim Solar ETF (NYSEARCA: TAN). I should mention that just last week, we added GT Advanced Technologies to our�SmallCap Network Elite Opportunity (SCN EO) portfolio for both�fundamentals and technical reasons and we are already up almost 9%.
Top 10 Machinery Companies To Watch In Right Now: Esco Technologies Inc (ESE)
ESCO Technologies Inc. (ESCO), incorporated in August 1990, is a producer of engineered products and systems sold to customers worldwide, primarily for utility, industrial, aerospace and commercial applications. ESCO operates in three segments: Utility Solutions Group (Utility Solutions), RF Shielding and Test (Test) and Filtration/Fluid Flow (Filtration). On July 31, 2010, the Company acquired the capital stock of Crissair, Inc. On September 3, 2010, the Company acquired the capital stock of Xtensible Solutions, Inc. its subsidiaries include Aclara Power-Line Systems Inc. (Aclara PLS), Aclara RF Systems Inc. (Aclara RF), Aclara Software Inc., Doble Engineering Company, Doble Lemke AG, Doble Lemke GmbH, Doble PowerTest Limited, Doble TransiNor AS, Crissair, Inc., PTI Technologies Inc., TekPackaging LLC, VACCO Industries, Beijing Lindgren ElectronMagnetic Technology Co., Ltd., ETS-Lindgren L.P., ETS-Lindgren OY, ETS Lindgren Limited and ETS Lindgren Japan, Inc. In January 2013, the Company acquired the assets of Metrum Technologies LLC. In June 2013, ESCO Technologies Inc announced that it has acquired Canyon Engineering Products Inc.
UTILITY SOLUTIONS
The Utility Solutions segment accounted for approximately 57% of the Company�� total revenue during the fiscal year ended September 30, 2010 (fiscal 2010). Aclara PLS is a manufacturer of two-way power line communication systems for the electric utility industry (the TWACS systems), which are composed of equipment (meter modules and equipment for central stations and substations), software and support services. The TWACS systems provide electric utilities with a communication technology for automatic meter reading, load control, interval data, outage assessment/restoration monitoring, remote service disconnect/connect, time-of-use data for critical peak pricing, tamper/theft detection and pre-paid metering. Revenue from the TWACS systems accounted for approximately 22% of the Company�� total revenue in fiscal 2010. Aclara R! F provides, through its STAR network, wireless radio frequency (RF) data communications systems to gas, water and electric utilities for advanced metering infrastructure (AMI) applications. In fiscal 2010, total revenue received by the Company from PG&E for all sales was 9.2% of the Company�� consolidated revenue. Revenue from STAR network products, accounted for approximately 17%, of the Company�� total revenue in fiscal 2010.
Aclara Software Inc. provides utilities with software systems for energy and water information, delivering a scalable meter data management system (MDMS), AMI/meter device records and asset management, business applications addressing areas, such as revenue assurance and distribution asset analysis. Aclara�� analytics-based software applications are used by over 100 energy organizations worldwide. Doble provides electric utility customers with products and services to achieve the reliability and sustainability of electric power infrastructure. It combines three elements for customers: diagnostic test instruments, expert consulting and testing services. Revenue from Doble�� products and services, accounted for approximately 15%, of the Company�� total revenue in fiscal 2010.
TEST
The Test segment accounted for approximately 23% of the Company�� total revenue in fiscal 2010. ETS-Lindgren designs and manufactures products to measure and contain magnetic, electromagnetic and acoustic energy. It supplies customers with a range of isolated environments including RF test enclosures, acoustic test enclosures, RF and magnetically shielded rooms, secure communication facilities and broadcast and recording studios. these facilities include shielded doors and windows. ETS-Lindgren also provides the design, program management, installation and integration services required to complete these types of facilities. ETS-Lindgren also supplies customers with a range of components, including RF absorptive materials, RF filters, active compensatio! n systems! , antennas, antenna masts, turntables and electric and magnetic probes, RF test cells, measurement software and other test accessories required to perform a variety of tests. ETS-Lindgren also offers a variety of services, including calibration for antennas and field probes, chamber certification, field surveys, customer training and a variety of product tests.
FILTRATION
The Filtration segment accounted for approximately 20%, of the Company�� total revenue in fiscal 2010. PTI is a supplier of filtration products serving the commercial aerospace, military aerospace and various industrial markets. The industrial markets include chemical processing, automotive and mobile equipment. Products include filter elements, assemblies, modules, indicators and other related components. VACCO supplies flow control products, valves and filters to the space, defense and commercial industries for use in aircraft, satellite propulsion systems, satellite launch vehicles and other space transportation systems, such as the Space Shuttle and its successor. VACCO also uses its etched disc technology to produce quiet valves and manifolds for the United States Navy applications. Crissair, Inc. supplies a variety of custom and standard valves and other various components to the aerospace, defense and commercial industries. Platform applications include fixed and rotary wing aircraft, air transport and business jets, and defense systems. TekPackaging LLC produces thermoformed products and packaging materials for medical, retail, food and electronic applications.
The Company competes with Itron, Inc., Silver Spring Networks, Landis+Gyr, Cannon Technologies Inc., Sensus Metering Systems Inc., Trilliant Inc., Elster Electricity, L.L.C., Comverge, Inc., Neptune Technology Group, e-Meter Corporation, Oracle Corporation, APOGEE Interactive Inc., Opower, Inc., Ecologic Analytics, LLC, SmartSynch, Inc.,Tantalus Systems Corp, OMICRON Electronics Corp. USA, OMICRON, Megger Group Limited, EM shiel! ding mark! et, TDK RF Solutions Inc., Albatross GmbH, IMEDCO AG, Cuming Corporation, Pall Corporation, Moog, Inc., SoFrance and Clarcor Inc.
Advisors' Opinion:- [By James Miller Phd]
Pall Corporation (PLL) is a supplier of filtration, separation and purification technologies, principally made by the company, for the removal of solid, liquid and gaseous contaminants from a range of liquids and gases. The company serves customers through two businesses globally: Life Sciences and Industrial. While Pall competes with many companies in the Life Sciences markets and Industrial, few companies operate in both, like ESCO Technologies Inc. (ESE) and Danaher Corp. (DHR).
- [By Travis Hoium]
What: Shares of engineered product maker ESCO Technologies (NYSE: ESE ) dropped 10% today after a disappointing earnings report.
So what: Net sales dropped 4.4% in the fiscal second quarter to $166.2 million, short of the $170.5 million estimate. Earnings per share after adjusting for non-operating charges were $0.28, still below the $0.34 estimate. �
No comments:
Post a Comment